Inateck P6 - Five Digits Additional Code

76
4.6.2. Five digits Additional Code
Decide whether to read ve digits additional code, which applies to EAN-8, EAN-13, ISBN,
ISSN, UPC-A and UPC-E, by scanning correspondent barcode below. Inateck P6 defaults to
“Disable Five Digits Additional Code”.
Steps to Enable Five Digits Additional Code are as below:
1). Read the "Enter Setup" barcode;
2). Read the "Enable Five Digits Additional Code" barcode;
3). Read the "Exit with Save" barcode.
Enable Five Digits Additional Code (*) Disable Five Digits Additional
Code
Enter Setup
Exit without Save
Exit with Save