Inateck P6 - ASCII Code Recognition Range Setting

38
3.4.4. ASCII Code Recognition Range Setting
Decide whether to support Code 39 Full ASCII that includes all the alphanumeric and
special character by selecting the correspondent barcodes below. The inateck P6 Scanner
takes “Enable Code 39 Full ASCII” as defaults. It could Disable full ASCII Code 39 “via
setting.
For example, Operations are as below if you want to enable Code 39 Full ASCII:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 39 Full ASCII" barcode;
3. Read the "Exit with Save" barcode.
Enable Code 39 Full ASCII (*) Disable Code 39 Full ASCII
Enter Setup
Exit without Save
Exit with Save