Inateck P6 - China Postal Code; Enable;Disable China Postal Code

66
3.15. China Postal Code
3.15.1. Enable/Disable China Postal Code
Decide whether to enable China Postal Code by scanning correspondent barcode below.
Inateck P6 defaults to “Disable China Postal Code”.
Operations are as below if you want to enable China Postal Code:
1. Read the "Enter Setup" barcode;
2. Read the "Enable China Postal Code " barcode;
3. Read the "Exit with Save" barcode.
Enable China Postal Code (*) Disable China Postal Code
Enter Setup
Exit without Save
Exit with Save