Inateck P6 - Convert UPC-E to UPC-A

57
3.10.4. Convert UPC-E to UPC-A
Decide whether to convert the UPC-E to UPC-A by scanning correspondent barcode
below. Inateck P6 defaults “Convert UPC-E to UPC-A”.
Operations are as below if you want to convert UPC-E to UPC-A:
1. Read the "Enter Setup" barcode;
2. Read the "Convert UPC-E to UPC-A" barcode;
4. Read the "Exit with Save" barcode.
(*) Convert UPC-E to UPC-A Do Not Convert UPC-E to UPC-A
Enter Setup
Exit without Save
Exit with Save