Inateck P6 - Code

40
Enable Code 32
Enable rst character of Code 32
(*) Disable Code 32
(*) Disable rst character of Code 32
Enter Setup
Enter Setup
Exit without Save
Exit without Save
Exit with Save
Exit with Save
3.4.6. Code 32
Code 32, usually applied to Italian medical products, is a special form of Code 39. Inateck
P6 defaults “Disable Code 32”.
Operations are as below if you want to enable Code 32:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 32" barcode;
3. Read the "Exit with Save" barcode.
The first character of Code 32 is fixed to be “A”. Decide whether to output the first
character of Code 32 via selecting correspondent barcode to scan. Inateck P6 defaults
“Disable rst character of Code 32”.