Inateck P6 - Enable; Disable IATA

59
3.11. IATA 2 of 5
3.11.1. Enable/ Disable IATA 25
Decide whether to enable IATA 25 by scanning correspondent barcode below. ,Inateck P6
defaults “Disable IATA 25”.
Operations are as below if you want to enable IATA 25 barcode:
1. Read the "Enter Setup" barcode;
2. Read the "Enable IATA 25 " barcode;
3. Read the "Exit with Save" barcode.
Enable IATA25 (*) Disable IATA 25
Enter Setup
Exit without Save
Exit with Save