Inateck P6 - Msi; Enable; Disable MSI Barcode

48
3.8. MSI
3.8.1. Enable / Disable MSI barcode
Decide whether to enable MSI barcode by scanning correspondent barcode below.
Inateck P6 defaults “Disable MSI barcode”.
Note: Read the "Disable MSI" barcode will make the scanner unable to read the MSI
barcode. Thus, if the scanner cannot read the MSI barcode, please try to scan "Enable MSI"
barcode to reset.
Operations are as below if you want to enable MSI barcode:
1. Read the "Enter Setup" barcode;
2. Read the "Enable MSI" barcode;
3. Read the "Exit with Save" barcode.
Enable MSI (*) Disable MSI
Enter Setup
Exit without Save
Exit with Save