Inateck P6 - Interleaved 2 of; Enable; Disable Interleaved

61
3.12. Interleaved 2 of 5
3.12.1. Enable / Disable Interleaved 25
Decide whether to enable Interleaved 25 by scanning correspondent barcode below.
Inateck P6 defaults to “Enable Interleaved 25”.
Operations are as below if you want to enable Interleaved 25:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Interleaved 25." barcode;
3. Read the "Exit with Save" barcode.
(*) Enable Interleaved 25 Disable Interleaved 25
Enter Setup
Exit without Save
Exit with Save