Inateck P6 - Checksum Verification

45
3.7.2. Checksum Verication
Decide whether to Transmit EAN-13 Checksum via selecting correspondent barcode
below to scan. Inateck P6 defaults transmit EAN-13 Checksum.
Operations are as below if you want to Enable EAN-13 and transmit EAN-13 Checksum:
1. Read the "Enter Setup" barcode;
2. Read the "Enable EAN-13" barcode;
3. Read the "Transmit EAN-13 Checksum" barcode;
4. Read the "Exit with Save" barcode.
Transmit EAN-13 Checksum Do Not Transmit EAN-8 Checksum
Enter Setup
Exit without Save
Exit with Save