Inateck P6 - Standard 2 of 5; Industrial 2 of; Enable; Disable Standard

64
3.14. Standard 2 of 5 / Industrial 2 of 5
Standard 2 of 5 is also known as Industrial 2 of 5.
3.14.1. Enable / Disable Standard 25
Decide whether to enable Standard 25 by scanning correspondent barcode below.
Inateck P6 defaults to “Disable Standard 25”.
Operations are as below if you want to enable Standard 25:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Standard 25" barcode;
3. Read the "Exit with Save" barcode.
Enable Standard 25 (*) Disable Standard 25
Enter Setup
Exit without Save
Exit with Save