Inateck P6 - Ean-8; Enable;Disable EAN-8

42
3.6. EAN-8
3.6.1. Enable/Disable EAN-8
Decide whether to read EAN-8 by scanning correspondent barcode below. Inateck P6
defaults “Enable EAN-8”.
Operations are as below if you want to enable EAN-8:
1. Read the "Enter Setup" barcode;
2. Read the "Enable EAN-8" barcode;
3. Read the "Exit with Save" barcode.
(*) Enable EAN-8 Disable EAN-8
Enter Setup
Exit without Save
Exit with Save