Inateck P6 - Page 24

24
Enter setup
Exit without Save
Exit with Save
For Example, steps to set the scanner into Continuous Scanning mode are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Continuous Scanning Mode" barcode;
3. Read the "Exit with Save" barcode.
Steps to set the scanner into Continuous Scanning mode and set the Intermittent time of
Continuous scanning setup into 1s are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Continuous Scanning Mode" barcode;
3. Read the "Setup Intermittent time of Continuous scanning " barcode;
4. Read the “1s” barcode;
5. Read the "Exit with Save" barcode.