Inateck P6 - Page 3

3
Chapter 2 How to Connect with Computer/phone/POS 26
2.1. USB Wired Data Transmission 26
2.2. Wireless Data Transmission 26
2.3. Transmission Speed 27
Chapter 3 Symbology Settings 28
3.1. Codabar 28
3.1.1. Enable / Disable Codabar 28
3.2. Code 11 29
3.2.1. Enable/Disable Code 11 29
3.2.2. Checksum Verication 30
3.3. Code 128 32
3.3.1. Enable / Disable Code 128 32
3.4. Code 39 33
3.4.1. Enable/Disable Code 39 33
3.4.2. Start/Stop Transmission 34
3.4.3. Checksum Verication 35
3.4.4. ASCII Code Recognition Range Setting 36
3.4.5. VIN 37
3.4.6. Code 32 38
3.6. EAN-8 40
3.6.1. Enable/Disable EAN-8 40
3.6.2. Checksum Verication 41
3.7. EAN-13 42
3.7.1. Enable / Disable EAN-13 42
3.7.2. Checksum Verication 43
3.7.3. ISBN 44
3.7.4. ISSN 45
3.8. MSI 46
3.8.1. Enable / Disable MSI barcode 46
3.8.2. Checksum Verication 47
3.9. UPC-A 49
3.9.1. Enable / Disable UPC-A 49
3.9.2. UPC-A output “0” 50
3.9.3. Checksum Verication 51
3.10. UPC-E 52
3.10.1. Enable / Disable UPC-E 52
3.10.2. Enable / Disable UPC-E 1 53
3.10.3. Start Character Transmission 54
3.10.4. Convert UPC-E to UPC-A 55
3.10.5. Checksum Verication 56