Inovance MD500-PLUS Series - Page 210

Parameter Groups
‑209‑
F6-02
Flying start speed
Address:
0xF602
Min.:
1
Unit:
‑
Max.: 100 Data type: UInt16
Default:
20
Change: In real time
Value Range:
1 to 100
Description
F6-03
Startup frequency
Address:
0xF603
Min.:
0
Unit:
Hz
Max.: 10 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0.00 Hz to 10.00 Hz
Description
This parameter defines the startup frequency for direct start of the AC drive. When
the startup frequency is higher than the frequency reference, the AC drive will not
start but stay standby.
F6-04
Startup frequency hold time
Address:
0xF604
Min.:
0
Unit:
s
Max.: 100 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0.0s to 100.0s
Description
This parameter defines the hold time during which the output frequency remains
at the startup frequency. After this hold time elapses, the AC drive will accelerate
to the reference frequency.
F6-05
DC braking current/Pre-excitation current at startup
Address:
0xF605
Min.:
0
Unit:
%
Max.: 150 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0% to 150%
Description