Parameter Groups
‑146‑
Description
In V/f mode, F3‑01 increases the output voltage of the AC drive according to a
fixed curve. When F3‑33 is larger than or equal to 100 or F3‑01 is set to 0, the
automatic torque boost compensation is an additional boost value related to the
load plus the output voltage set by F3‑01. The greater the F3‑33, the greater the
torque boost compensation. When F3‑33 is smaller than 100 and F3‑01 is set to a
non‑zero value, the automatic torque boost compensation is disabled.
2.5 F4 Input Terminal
F4-00
DI1 function selection
Address:
0xF400
Min.:
0
Unit:
‑
Max.: 93 Data type: UInt16
Default:
1
Change:
At stop
Value Range:
To Next Page
Loading...
