Parameter Groups
‑185‑
2.6 F5 Output Terminal
F5-01
Expansion card relay output function selection
Address:
0xF501
Min.:
0
Unit:
‑
Max.: 51 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0: No output
1: Running
2: Fault output (stop upon fault)
3: Frequency‑level detection FDT1 output
4: Frequency reached
5: Zero speed running (no output at stop)
6: Motor overload pre‑warning
7: AC drive overload pre‑warning
8: Set count value reached
9: Designated count value reached
10: Length reached
11: PLC cycle completed
12: Accumulative running time reached
13: Frequency limited
14: Torque limited
15: Ready for run
To Next Page
Loading...
