Inovance MD500-PLUS Series - F7 Key and Display

Parameter Groups
‑217‑
Min.:
‑200
Unit:
%
Max.: 200 Data type: Int16
Default:
0
Change: In real time
Value Range:
‑200.0% to +200.0%
Description
2.8 F7 Key and Display
F7-01
MF.K key function selection
Address:
0xF701
Min.:
0
Unit:
‑
Max.: 4 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0: MF.K key disabled
1: Switchover between operating panel control and remote control (terminal or
communication)
2: Switchover between forward and reverse run
3: Forward jog
4: Reverse jog
Description
The MF.K key is a multi‑functional key. This parameter is used to set the function
of the MF.K key.
0: MF.K key disabled
The MF.K key does not work.
1: Switchover between remote control (terminal or communication) and
operating panel control. When F0‑02 is set to 0 (operating panel), the MF.K does
not work. When F0‑02 is set to 1 (terminal), the MF.K key is used for switchover
between the terminal control and operating panel control. When F0‑02 is set to 2
(communication), the MF.K key is used for switchover between the
communication control and operating panel control.
2: Switchover between forward and reverse run
The MF.K key is used for changing the direction of the frequency reference. This
function is valid only when the operating panel is set as the command source.