Inovance MD500-PLUS Series - 3.4.16 Wobble Control Function

Function Application
‑597‑
Parameters
Para. Name
Value Range Default
F6‑26
Electromagnetic
shorting current
0% to 200% 100%
F6‑27
Electromagnetic
shorting time upon
startup
0.0s to 100.0s 0.0s
F6‑28
Electromagnetic
shorting time upon
stop
0.0s to 100.0s 0.0s
F6‑11
Start frequency of
DC braking at stop
0.00 Hz to F0‑10
(Maximum
frequency)
0.00 Hz
3.4.16Wobble Control Function
The wobble function means the output frequency wobbles up and down around the
frequency reference (set through F0‑07). This function is applicable to textile industry
and chemical fiber industry, as well as scenarios where horizontal movement and
winding are required.
Figure 3‑49 Wobble application