Function Application
‑518‑
Figure 3‑24 Selecting an auxiliary frequency source
Para. Parameter Name
Value Range Default
F0‑04
Auxiliary frequency
source Y
0: Digital setting (preset frequency
(F0‑08) that can be changed by
pressing UP/DOWN; non‑retentive
upon power failure)
1: Digital setting (preset frequency
(F0‑08) that can be changed by
pressing UP/DOWN; retentive at
power failure)
2: AI1
3: AI2
4: AI3
5: Pulse reference (DI5)
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Reserved
0
To Next Page
Loading...
