Intel® Server Board S2600CW Family TPS
Intel® Server Board S2600CW Connector/Header Locations and Pin-outs
Revision 2.4
Figure 20. Video Connector Pin-out
Note: Intel Corporation server boards support peripheral components and can contain a
number of high-density VLSI and power delivery components that need adequate airflow to
cool. Intel’s own chassis are designed and tested to meet the intended thermal requirements of
these components when the fully integrated system is used together. It is the responsibility of
the system integrator that chooses not to use Intel developed server building blocks to consult
vendor datasheets and operating parameters to determine the amount of airflow required for
their specific application and environmental conditions. Intel Corporation cannot be held
responsible if components fail or the server board does not operate correctly when used
outside any of its published operating or non-operating limits.
7.7 PCIe Riser Slot
The following table provides the pin-out for PCIe slot 6 as a riser slot.
SIGNAL DESCRIPTION Riser
Define (PCIe Spec)
SIGNAL DESCRIPTION Riser
Define (PCIe Spec)
A2
P12V B2
P12V
To Next Page
Loading...
Need help?
General
