Intel® Server Board S2600CW Functional Architecture Intel® Server Board S2600CW Family TPS
16 Revision 2.4
Figure 12. Intel® Server Board S2600CW2SR/S2600CWTSR Functional Block Diagram
3.1 Processor Support
The server board includes two Socket-R3 (LGA2011-3) processor sockets and can support
two processors from the Intel® Xeon® processor E5-2600 v3 or v4 product families with a
Thermal Design Power (TDP) of up to 145W.
Previous generation Intel® Xeon® processors are not supported on the Intel® Server Boards
described in this document.
Visit the Intel website for a complete list of supported processors.
3.1.1 Processor Socket Assembly
Each processor socket of the server board is pre-assembled with an Independent Latching
Mechanism (ILM) and Back Plate which allow for secure placement of the processor and
processor heat to the server board.
The illustration below identifies each sub-assembly component.
To Next Page
Loading...
