Intel® Server Board S2600CW Family TPS Appendix F: POST Error Code
Revision 2.4
DIMM_O3 encountered a Serial Presence Detection (SPD) failure
DIMM_P1 encountered a Serial Presence Detection (SPD) failure
DIMM_P2 encountered a Serial Presence Detection (SPD) failure
DIMM_P3 encountered a Serial Presence Detection (SPD) failure
POST Reclaim of non-critical NVRAM variables
BIOS Settings are corrupted
Serial port component was not detected
Serial port component encountered a resource conflict error
TPM device missing or not responding.
TPM device failed self-test.
PCI component encountered a SERR error
PCI Express* component encountered a PERR error
PCI Express* component encountered an SERR error
The following table lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users on error conditions. The beep code is followed by
a user-visible code on the POST Progress LEDs.
Table 97. POST Error Beep Codes
System halted because a fatal error related to the memory
was detected.
violation
System halted because Intel
®
Trusted Execution
Technology detected a potential violation of system
security.
POST Error Beep Code
The Integrated BMC may generate beep codes upon detection of failure conditions. Beep
codes are sounded each time the problem is discovered, such as on each power-up attempt,
but are not sounded continuously. Codes that are common across all Intel
®
Server Boards and
Systems that use same generation chipset are listed in the following table. Each digit in the
code is represented by a sequence of beeps whose count is equal to the digit.
Table 98. Integrated BMC Beep Codes
No CPUs installed or first CPU socket is
empty.
To Next Page
Loading...
Need help?
General
