Intel S2600CW - Advanced Management Feature Support (RMM4 Lite); Table 13. Basic and Advanced Server Management Features Overview; Table 5. Intel

Intel® Server Board S2600CW Platform Management Intel® Server Board S2600CW Family TPS
88 Revision 2.4
 Warn user the reconfiguration of IP address will cause disconnect
 Capability to block logins for a period of time after several consecutive failed login
attempts. The lock-out period and the number of failed logins that initiates the
lock-out period are configurable by the user.
 Server Power Control – Ability to force into Setup on a reset
 System POST results – The web server provides the system’s Power-On Self Test
(POST) sequence for the previous two boot cycles, including timestamps. The
timestamps may be viewed in relative to the start of POST or the previous POST code.
 Customizable ports – The web server provides the ability to customize the port
numbers used for SMASH, http, https, KVM, secure KVM, remote media, and secure
remote media.
For additional information, reference the Intel® Remote Management Module 4 and Integrated
BMC Web Console Users Guide.
5.5 Advanced Management Feature Support (RMM4 Lite)
The integrated baseboard management controller has support for advanced management
features which are enabled when an optional Intel
®
Remote Management Module 4 Lite (RMM4
Lite) is installed. The Intel
®
RMM4 add-on offers convenient, remote KVM access and control
through LAN and internet. It captures, digitizes, and compresses video and transmits it with
keyboard and mouse signals to and from a remote computer. Remote access and control
software runs in the integrated baseboard management controller, utilizing expanded
capabilities enabled by the Intel RMM4 hardware.
Intel Product
Code
Description
Kit Contents
Benefits
AXXRMM4LITE
Intel
®
Remote Management Module
4 Lite
RMM4 Lite Activation
Key
Enables KVM & media redirection
When the BMC FW initializes, it attempts to access the Intel
®
RMM4 lite. If the attempt to
access the Intel
®
RMM4 lite is successful, the BMC activates the Advanced features.
The following table identifies both Basic and Advanced server management features.
Table 13. Basic and Advanced Server Management Features Overview
Feature
Basic
Advanced
IPMI 2.0 Feature Support
X
X
In-circuit BMC Firmware Update
X
X
FRB 2
X
X
Chassis Intrusion Detection
X
X
Fan Redundancy Monitoring
X
X
Hot-Swap Fan Support
X
X