Intel S2600CW - Table 40. DC Output Connector

Intel® Server Board S2600CW Family TPS Power Supply Specification Guidelines
Revision 2.4
123
10.2.1.1 DC Output Connector
The power supply uses a card edge output connection for power and signal that is compatible
with a 2x25 Power Card Edge connector (equivalent to 2x25 pin configuration of the FCI
power card connector 10035388-102LF).
Table 40. DC Output Connector
Pin
Name
Pin
Name
A1
GND
B1
GND
A2
GND
B2
GND
A3
GND
B3
GND
A4
GND
B4
GND
A5
GND
B5
GND
A6
GND
B6
GND
A7
GND
B7
GND
A8
GND
B8
GND
A9
GND
B9
GND
A10
+12V
B10
+12V
A11
+12V
B11
+12V
A12
+12V
B12
+12V
A13
+12V
B13
+12V
A14
+12V
B14
+12V
A15
+12V
B15
+12V
A16
+12V
B16
+12V
A17
+12V
B17
+12V
A18
+12V
B18
+12V
A19
PMBus* SDA
B19
A0 (SMBus* address)
A20
PMBus* SCL
B20
A1 (SMBus* address)
A21
PSON
B21
12V stby
A22
SMBAlert#
B22
Cold Redundancy Bus
A23
Return Sense
B23
12V load share bus
A24
+12V remote Sense
B24
No Connect
A25
PWOK
B25
Compatibility Check pin
10.2.1.2 Handle Retention
The power supply has a handle to assist extraction. The module is able to be inserted and
extracted without the assistance of tools. The power supply has a latch which retains the
power supply into the system and prevents the power supply from being inserted or extracted
from the system when the AC power cord is pulled into the power supply.
The handle protects the operator from any burn hazard.