Server Board Overview Intel® Server Boards S3200SH/S3210SH TPS
4 Revision 1.8
Intel Order Number: E14960-009
Video
ServerEngines* Integrated BMC (Baseboard management controller)
External 32 MB (or greater) DDR2 533 MHz memory
VGA Video external connector
Peripheral Interface (PCI Express* and PCI)
o Two different PCI Express* configurations on a single board, dependent on board
SKU
LX board SKU: One PCI Express* x16 and one PCI Express* x8 slot,
connected to the PCI Express* ports of the MCH
LC board SKU: One PCI Express* x16 and one PCI Express* x8 slot,
connected to the PCI Express* ports of the MCH; one PCI Express* x8
slot, connected to PCI Express* x4 interface of the ICH
L and V board SKUs: Two PCI Express* x8 slots, one connected to the
PCI Express* x8 interface of the MCH and the other connected to the PCI
Express* x4 interface of the ICH
HDD Interface
o Six SATA II ports, 300 MB/s
USB
o Two USB 2.0 ports connected to the server rear panel
o Two USB 2.0 ports connected to headers on the server board
o One USB 2.0 port connected to an internal vertical connector
LAN
o One Gigabit Ethernet device (82541PI, MAC + PHY) connect to PCI interfaces
on the Intel
®
ICH9R
o One Gigabit Ethernet PHY (82566DM) connected to the Intel
®
ICH9R through
GLC/LCI interface (not in V board SKU)
o Two 10/100/1000 Base-TX interfaces through RJ-45 connectors with integrated
magnetics
o Link and speed LEDs on the RJ-45 connector
Power Supply
o SSI EEB (Server System Infrastructure Electronic Bay) Power Connectors
o On-board Power generation
VRD 11 processor core voltage
1.2 V regulator for FSB VTT
1.25 V regulator for MCH core and I/Osf
1.05 V regulator for ICH9R core
1.5 V regulator for the ICH9R I/O
1.8 V for DDR2 and 0.9 V for DDR2 termination
3.3 V SB voltage regulator
1.8 V AUX, 1.2 V AUX, and 0.9 V AUX for Integrated BMC and the DDR2
memory supporting it
To Next Page
Loading...
Need help?
General
