Intel® Server Boards S3200SH/S3210SH TPS Server Board Overview
Revision 1.8 5
Intel Order Number: E14960-009
System Management
o Processor on die temperature monitoring through PECI (Platform Environment
Control Interface)
o Board temperature measurement
o Fan speed monitoring and control
o Voltage monitoring
o IPMI-based (Intelligent Platform Management Interface) server management
Battery
o Socketed, Lithium coin cell-3 V
Sockets
o One LGA775 processor (Socket-T)
o Four DDR2 DIMM Sockets
o One battery (CR2032)
Legacy Interfaces
o Serial
o Floppy
o PS/2 keyboard
o PS/2 mouse
Power Management Modes Supported (ACPI [Advanced Configuration and Power
Interface] Sleep states)
o S0 – Full on
o S1 – Power-on-suspend
o S4 – Suspend to Disk
o S5 – Soft on/off
Connectors List
o Four 240-Pin DDR2 DIMM connectors
o PCI Express*, PCI-X, and PCI connectors (see SKU specific information)
o One RJ-45 Connectors with magnetics and LEDs
o One stacked RJ-45 with magnetics and LEDs and two-USB combo connector
o 34-pin floppy drive connector
o One serial port headers
o Dual-stacked PS/2 keyboard and mouse connector
o USB connectors (two stacked on the rear panel and three on the server board
headers)
o SSI-EEB ATX power connectors
o One 4-pin auxiliary power connector
o One stacked DB-15 VGA/DB-9 serial port connector
o Six 7-pin SATA II connectors
o 60-pin XDP connector
o Four 4-pin, 0.10-inch pitch fan headers
o 24-Pin, SSI-EEB, front panel connector
To Next Page
Loading...
Need help?
General
