Using AptusLX
63
NOTE 1.
Service - Current Data Routing: WAN
This menu is not available for Fleet One model.
NOTE 2.
Tracking Satellite - Status:
The following 6 status information is displayed.
• Initialize: The antenna system is Initializing.
• Setup: The antenna system is waiting for BDU commands.
• Searching: The antenna system is searching for a satellite connection.
• Tracking: The antenna system is connected to the satellite, and is tracking.
• Diagnostic: The antenna system is performing antenna diagnosis.
• Upgrading: The antenna system is upgrading rmware.
NOTE 3.
Tracking Satellite - Quality:
This value is provided by Modem and displays the quality score of the received signal (Range: 0 ~ 20).
NOTE4.
To send a new SMS click the letter icon. Type the message and recipient's phone number.
For more information see “8.8.7 SMS” on page 79.
8.6.1 Satellite Data Connection Control
No. Description
①
Displays the satellite data connection status. The screen is different depending on the user access
level.
When logging in with the admin account
(intellian);
• Monitors the connection status of all service
user groups.
NOTE: For Fleet One, the service user
group which has the streaming profile is not
displayed because it does not support data
streaming.
• All the service groups are displayed for
devices including non-registered devices.
Device registration is not required when
you are logged in with admin account
(intellian). Activate the data connections on
the dashboard with the activation buttons to
use the device which is logged in with admin
account (intellian).
• If you deactivated a service user group, the
data sessions of all devices included in the
service user group are terminated.
When logging in with a guest account (guest);
• Available service groups are displayed on
the dashboard for the devices which are
already registered. You can activate the data
connection of your own service group with
the activation button, then you can use the
satellite data of your service group.
• If you deactivate the service user group, the
data session of your device is terminated.
• If the device is not registered in the Device
Registration menu, ‘Unregistered device’ is
displayed and the data cannot be used. For
device registration, refer to the “7.5 Activating
Data Connection” on page 49.
To Next Page
Loading...
Need help?
General
