FB250/Fleet One - Marine Satellite Communication System
72
8.8.2 Wi-Fi
1
2
3
4
No. Item Description
①
Wi-Fi Sets the Wi-Fi access information.
②
Wi-Fi Config
Sets the Wi-Fi access point configuration.
• Activate: Sets the Wi-Fi function by toggling the activation button (Enabled/
Disabled).
• SSID: The SSID is the network name shared among all devices in a wireless
network. The SSID must be identical for all devices in the wireless network. It
is case-sensitive and must not exceed 32 alphanumeric characters, which may
be any keyboard character. Make sure this setting is the same for all devices
in your wireless network.
• SSID Broadcast: Sets the SSID broadcast function by toggling the activation
button (Enabled/Disabled).
• Channel: Selects an appropriate channel from the list provided to correspond
with your network settings. All devices in your wireless network must use the
same channel in order to function correctly. Try to avoid conflicts with other
wireless networks by choosing a channel where the upper and lower three
channels are not in use.
• Mode: Sets the security mode type (Open/Password protected).
• Passphrase: Enter the user name connected to Wi-Fi.
Click the Apply button to apply the settings to the system.
③
MAC Filter
• MAC Filter Mode: Select the MAC filter mode (Disable/White List/Black List).
- Disable: The MAC filter is disabled.
- White List: In Whitelist mode, the router will restrict LAN access to all
computers except those contained in the MAC Filter List.
- Black List: In Blacklist mode, the listed devices are completely blocked from
local network access.
Click the Apply button to apply the settings to the system.
NOTE: Use caution when using the MAC Filter to avoid accidentally blocking
yourself from accessing the router.
④
MAC Filter List
Displays the MAC address. To create new MAC addresses, click the Add( )
button. Then the pop-up window is opened. You can assign the new MAC
address. Click the Create button. The created MAC addresses display on the
list.