Installing BDU
43
6.6.6 Connecting BDU to Device using WAN Port
Intellian provides the Ethernet Cable. Connect the Ethernet Cable from the WAN port on the back of the
BDU to the RJ-45 port on the devices such as LTE modem.
* The WAN port is not supported for Fleet One model.
WAN
BDU
LTE Modem
* NOT supported for Fleet One.
Figure 33: BDU to Device Cable Connection using WAN Port
6.6.7 Connecting BDU to POTS Phone (RJ14)
Connect the standard phone cord (customer supplied) from the POTS Phone port on the back of the BDU
to the RJ-14 port on the POTS phone as default.
POTS Phone (RJ14)
BDU
POTS
Phone
Figure 34: BDU to POTS Phone (RJ14) Cable Connection
Up to 2 POTS Phones can be connected to the BDU using a RJ14 Cable Splitter (customer supplied). Using
a RJ14 Cable Splitter, the two POTS phones can each have a separate phone line (not two phones using
the same phone line). The POTS phone 1 (no. 101) is connected to a pair of Pin 3 (R1-) and Pin 4 (T1+)
wires. The POTS phone 2 (no. 102) is connected to a pair of Pin 5 (R2-) and Pin 2 (T2+) wires.
POTS Phone (RJ14)
BDU
RJ14 Cable Splitter
POTS Phone 1
(no. 101)
POTS Phone 2 (no.
102)
Pin 5 (R2-) & Pin 2
(T2+)
Pin 3 (R1-) & Pin 4
(T1+)
Figure 35: Using Cable Splitter with POTS Phones (RJ14)
To Next Page
Loading...
Need help?
General
