FB250/Fleet One - Marine Satellite Communication System
86
8.8.12 USIM
1
2
3
4
NOTE
No. Item Description
①
USIM Sets the use of a PIN to access the terminal.
②
PIN
Configuration
Select Enabled or Disable to use a PIN.
• Enable: You must enter a PIN before you can change settings or make calls or
data sessions.
• Disable: You can access and use the terminal without entering a PIN.
Click the Apply button to apply the settings to the system. The new PIN settings
will take effect at the next power on.
③
Change PIN
Changes the PIN used to access the terminal.
• Old PIN: Type in the old PIN.
• New PIN: Type in the new PIN.
• Confirm new PIN: Retype in the new PIN.
Click the Apply button to apply the settings to the system. The new PIN settings
will take effect at the next power on.
④
Mobile Number
Enters the mobile number.
The mobile number is not available at delivery. The user has to enter the number
received from the Airtime provider.
Click the Apply button to apply the settings to the system.
NOTE
The Number is for your information.
To Next Page
Loading...
Need help?
General
