Using AptusLX
57
Chapter 8. Using AptusLX
8.1 Introduction
With the embedded AptusLX software, the antenna can be monitored, controlled, and diagnosed remotely,
anytime through the TCP/IP protocol. It saves your time and cost generated by various maintenance
activities such as operating firmware upgrades, tracking parameter resets, and system diagnosis, etc.
8.2 Accessing Internal Webpage of BDU
The network is automatically configured by DHCP with no additional PC IP configuration.
1. Connect an Ethernet cable from any LAN ports (Port 1~ Port 4) on the back of the BDU to the LAN port
of PC. The network connection is established automatically.
2. Enter the BDU IP address (Default: 192.168.0.1) or (https://portal.aptuslx.local) into the address bar of
the web browser to login to the internal HTML page of BDU.
NOTE
AptusLX works on Internet Explorer 11 or higher (Windows 7 or higher editions), Firefox, Microsoft Edge and
Chrome web browsers.
If you cannot open AptusLX on Chrome, clear all browsing data (history, cookies, cache, and more) in
Chrome’s setting and try again.
To Next Page
Loading...
Need help?
General
