INVT Goodrive300-01A-RT Series

Goodrive300-01A-RT series integrated machine RS485 communication LCD keypad
-108-
Parameter
Description
Sleep: When you choose the sleep function and the master empty-load running
time reaches the sleep time that is set, the device enters the sleep state. The
device automatically wakes up when the pressure is lower than the loading
pressure.
Stop: indicates that the device has stopped.
Restart delay: is used for device protection. If you press the restart key
immediately after pressing the stop key, the device can be restarted with a restart
delay, which is displayed and counted down. When the countdown time is 0, the
device enters the standby state, and the start key is valid.
Off: indicates the RS485 communication between the LCD keypad and VFD is
disconnected.
Output
frequency
It displays the value of the current running frequency of the master VFD.
Present
pressure
It displays the value of the current pressure.
Present
temperature
It displays the value of the current temperature.
Accumulated
run time
It displays the total running time of device.
B.4.3 Setting interface
In the main interface, you can press Set to enter the following interface:
03.17 16:02:35
Home
Reset
Return Confirm
Set
Load
Unload
Start
Stop
Figure B-9 Setting interface
In this interface, you can press the Up or Down key to select different operation functions. Then press
OK for control; press Back or Home to return to the working
environment interface.