INVT Goodrive300-01A-RT Series - Maintenance Parameter Interface

Goodrive300-01A-RT series integrated machine RS485 communication LCD keypad
-115-
03.17 16:02:35
Home
Boot time ShutTime Boot Shutdown
Return Confirm
Mon.
0:0 0 0 0:0 0 Disable Disable
0
Figure B-20 Start/stop status setting interface
B.4.7 Maintenance parameter interface
1. Enter the maintenance parameter interface through the main menu.
03.17 16:02:35
Home
Air filter set time xxxxxx h
Return Edit
Maintain param
Oil filter set time xxxxxx h
Splitter set time xxxxxx h
Lubricat Oil set time xxxxxx h
Grease set time xxxxxx h
Air filter run time xxxxxx h
03.17 16:02:35
Home
Grease run time xxxxxx h
Return Edit
Maintain param
Air filter run time xxxxxx h
Oil filter run time xxxxxx h
Splitter run time xxxxxx h
Lubricat Oil run time xxxxxx h
Grease set time xxxxxx h
Figure B-21 Maintenance parameter interface
Maintenance
parameter
Initial
value
Function
Air filter set time
0
If the accumulative air filter use time exceeds this value, a
pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.