Goodrive300-01A-RT series integrated machine RS485 communication LCD keypad
-117-
03.17 16:02:35
Home
Set value
Return Confirm
Air filter set time
xxxx h
Max. 065535
Min. 000000
x
Figure B-23 Air filter set time
Maintenance parameters are set according to the use status of accessories. During running, if the use
time of an accessory is equal to or greater than the set time, a pre-alarm is displayed, indicating that
the accessory needs maintenance or it needs to be replaced. The use time needs to be cleared to 0
when the new accessory is used.
03.17 16:02:35
Home
Current value
Return Clear
Oil filter run time
xxxxx h
Figure B-24 Accumulative oil filter use time
B.4.8 Protection parameter interface
1. Enter the protection parameter interface through the main menu.
03.17 16:02:35
Home
Prealarm Pressure xxx.xx MPa
Return Edit
Protection param
Alarm Pressure xxx.xx Mpa
Prealarm Temp xxxxxx
Alarm Temp xxxxxx
Low Temp Protect Thred xxxxxx
Auxiliary Press Protection Invalid