INVT Goodrive300-01A-RT Series - P04 Group SVPWM Control

Goodrive300-01A-RT series integrated machine Function description
-39-
Function
code
Name
Description
Default
Modify
P03.20
Electromotive torque
upper limit set through
keypad
0.0–300.0% (of the motor rated current)
180.0%
○
P03.21
Braking torque upper
limit set through
keypad
0.0–300.0% (of the motor rated current)
180.0%
○
P03.22
Weakening coefficient
in constant power zone
0.1–2.0
0.3
○
P03.23
Lowest weakening
point in constant power
zone
10%–100%
20%
○
P03.24
Max. voltage limit
0.0–120.0%
100.0%
○
P03.25
Pre-exciting time
0.000–10.000s
0.300s
○
P03.26
Flux-weakening
proportional gain
0–8000
300
○
P03.27
Speed display
selection in vector
control
0: Display the actual value
1: Display the set value
0
○
P04 group SVPWM control
Function
code
Name
Description
Default
Modify
P04.00
V/F curve setting of
motor 1
0: Straight-line V/F curve
0
◎
P04.01
Torque boost of motor
1
0.0%: (automatic); 0.1%–10.0%
0.0%
○
P04.02
Torque boost cut-off of
motor 1
0.0%–50.0% (relative to rated frequency of
motor 1)
20.0%
○
P04.03
V/F frequency point 1
of motor 1
0.00Hz–P04.05
0.00Hz
○
P04.04
V/F voltage point 1 of
motor 1
0.0%–110.0% (of the rated voltage of motor
1)
00.0%
○
P04.05
V/F frequency point 2
of motor 1
P04.03– P04.07
00.00Hz
○
P04.06
V/F voltage point 2 of
motor 1
0.0%–110.0% (of the rated voltage of motor
1)
00.0%
○