INVT Goodrive300-01A-RT Series - Page 122

Goodrive300-01A-RT series integrated machine RS485 communication LCD keypad
-116-
Maintenance
parameter
Initial
value
Function
Oil filter set time
0
If the accumulative oil filter use time exceeds this value, a
pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
Splitter set time
0
If the accumulative splitter use time exceeds this value, a
pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
Lubricate oil set
time
0
If the accumulative lubrication oil use time exceeds this
value, a pre-alarm is displayed. If this value is set to 0, no
pre-alarm is displayed.
Grease set time
0
If the accumulative grease use time exceeds this value, a
pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
Air filter run time
/
It is cleared when a new air filter is used.
Oil filter run time
/
It is cleared when a new oil filter is used.
Splitter run time
/
It is cleared when a new splitter is used.
Lubricate oil run
time
/
It is cleared when new lubrication oil is used.
Grease run time
/
It is cleared when new grease is used.
2. You can edit parameters after entering the correct administrator password.
03.17 16:02:35
Home
Please enter current password:
Return Confirm
000
0
Figure B-22 Administrator password input interface