How to solve incorrect display of limit value on INVT Goodrive300-01A-RT?
If your INVT Inverter incorrectly displays the upper or lower limit value (e.g., 999 or -999), check and confirm the sensor feedback line is routed with the motor cable at a distance of at least 20cm.
General| Series | Goodrive300-01A-RT |
|---|---|
| Category | Inverter |
| Output Frequency | 0-400Hz |
| Frequency Range | 0-400Hz |
| Protection Level | IP20 |
| Overload Capacity | 150% for 60 seconds |
| Enclosure Rating | IP20 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit |
| Communication Interface | RS485 |
| Ambient Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5-95% (non-condensing) |
| Altitude | ≤1000m |
| Cooling Method | Forced air cooling |
| Control Method | Vector Control/Scalar Control |
To Next Page