5-30
Capter 5 Setup Mode
Menu name Specification
Y-AXIS Display the Y axis of selected unit.
The axis is moved by entering numerical number.
FEED Feed the label.
PRINT Perform test printing by the format called and the item information set
by PLU number.
UNIT ERASE Delete the selected unit.
COPY Enter numerical number and press COPY to copy the said numerical
number's format.
DELETE Delete the format master.
The dialog appears to ask whether to delete the format master.
←↑→↓ Move the axis of selected unit.
If HEADER is selected, the axis of whole format is moved.
To Next Page
Loading...
