Error Messages
Error
Code
Error Message Description
11 CVDAC selftest 1 In CV mode, DAC channel 1
self-test failed.
12 CVDAC selftest 2 In CV mode, DAC channel 2
self-test failed.
13 CCDAC selftest 1 In CC mode, DAC channel 1
self-test failed.
14 CCDAC selftest 2 In CC mode, DAC channel 2
self-test failed.
15 CRDAC selftest 1 In CR mode, DAC channel 1
self-test failed.
16 CRDAC selftest 2 In CR mode, DAC channel 2
self-test failed.
20 Input Down Input drop
40 Flash write failed Writing to flash failed.
41 Flash erase failed Failed to erase the flash.
80 Digital I/O selftest error Digital I/O self-test error
Device related errors
213 RS232 buffer overrun error RS232 buffer overflow
216 RS232 receiver framing error RS232 receiver frame error
217 RS232 receiver parity error RS232 receiver parity error
218 RS232 receiver overrun error RS232 receiver overflow
220 Front panel uart overrun The serial port communication
between the front panel and
the control board overflows.
221 Front panel uart framing The serial port frame between
the front panel and the control
board is incorrect.
222 Front panel uart parity The serial port parity between
the front panel and the control
board is incorrect.
223 Front panel buffer overrun The serial port buffer between
the front panel and the control
board overflows.
Copyright © Itech Electronic Co., Ltd.
184
To Next Page
Loading...
Need help?
General
