Operation
Starting the Machine
6. If an incorrect PIN code is entered, both the ‘tick’ button and 'back' button will flash for the specified duration,
the lock symbol on the instrument cluster will not disappear. Repeat step 2 to 5
Duration: 3s
7. If the PIN code is incorrectly entered five times, the immobiliser will lock for the specified duration.
Duration: 15min
8. During an active ‘Lockout’ state', both the ‘tick’ button and 'back' button will flash and PIN entry shall not
be possible. Allow the lockout to timeout, both the ‘tick’ button and 'back' button will not be illuminated.
Repeat step 2 to 5
To Arm the Immobiliser
1. Stop the machine. Remove the ignition key.
2. The immobiliser arms automatically after two minutes.
3. If you restart the machine within two minutes, the system disarms automatically.
40 9831/8250-4 40
JCB © Admin Pimteam - 23/06/2021 05:32.
To Next Page
Loading...
