2-21
Right part of the screen
*108, *110, *111 Refer to page 2-6.
*620 It synchronizes with profile 1 screen setup.
*621 Refer to 4.7.2 “Profile 2 Setting (Ellipse Display)”.
*622 The layer without data displays “*”.
Profile Current; Current Direction/Current Speed:
The current is displayed in the vector in an ellipse graph.
The length of the vector shows the speed of the Current,
and the direction of the vector shows the direction of the
Current.
N(north) is displayed for the north up bearing and E(east)
is displayed right.
The direction of the prow is fixed to 0°(upper part) for the
head up bearing and it displays.
・Selecting frame menu display: 12.1.2- (22)
Ellipse Graph Flow Speed Range:
The flow speed range of the graph is
set by the menu. *620
・Selecting frame menu display:
12.1.2- (22)
Ellipse Graph View Point:
The graph view point is set by the menu.
View Point of Deflection Angle:
Setting of deflection angle.
View Point of Horizontal Angle:
Setting of bearing. *621
・Selecting frame menu display: 12.1.2- (22)
The ship speed and course are displayed.
Doppler:
The bottom tracking or water tracking ship
speed measured with the current meter is
displayed.
GPS: Ship speed from the navigation
equipment such as GPS is displayed. *110
・Selecting frame menu display: 12.1.2-(10)
The water temperature is displayed. *108
・
Selecting frame menu display: 12.1.2-(7)
The cursor is displayed in a green ellipse.
It moves up and down in the direction of
depth with a ▲▼ key. The value of
current direction/current speed of the
current in depth at the ellipse cursor
position is displayed. *622
Wind Direction/Wind Speed:
It displays wind direction and wind speed. *111
・Selecting frame menu display: 12.1.2-(16)
Current Direction/Flow Speed of D Layer:
Depth 200m
Current direction 222°
Current speed 0.3 kn
*621
The display of the profile vector is set by
the menu.
Depth Range:
The depth range in the graph is set by the
menu. *620
・Selecting frame menu display: 12.1.2- (22)
Wind Direction Arrow
The direction of the arrow
shows the wind direction.*111
Depth
Range
Cursor:
Value
Current Speed/
Direction of D Layer
Display
Range
Bottom Line