4-30
2. Tap "DELETE" and enter a number of a starting point and an ending point of the deletion
source.
The input method is outlined below.
(1) MANUAL: Enter an ending point and a starting point.
(2) ROUTE LIST: Select from the route list.
(3) ALL: All the routes are deleted.
When copying one point only, enter the same number for a starting point and an ending point.
(1) MANUAL input
a) Tap .
(2) Selecting from a ROUTE LIST
a) Tap .
b) Tap a starting point and an ending point on the route list.
c) Confirm the selection by tapping .
(3) Selecting ALL
a) Tap .
All the routes are selected.
3. Tap "DELETE METHOD" and select a deletion method.
4. Tap and execute the deletion.
Item Description
FROM Set a startin
number.
TO Set an endin
number.
DELETE METHOD Description
ROUTE Onl
the selected route is deleted. The wa
point is not deleted.
ROUTE+WPT The selected route and the wa
point on the route are deleted.
To Next Page
Loading...
Need help?
General
