4-49
4.9 Setting MOB
MOB (Man-overboard) stores the position when a person or a material item fell overboard, by
executing the MOB function. This function enables the ship to return to the position quickly.
The MOB function is available on all the screens.
When MOB is executed, a plotting screen is displayed automatically, the MOB mark is
displayed, indicating the bearing and distance from the current position to the man-overboard
position.
Procedure
1. Tap .
Countdown for 5 seconds starts at the bottom right corner of the screen. When is tapped
again within 5 seconds, the MOB function is cancelled.
Ending MOB
1. Tap again.
2. When the following popup window is displayed, select “YES”.
After 5
seconds
Executing MOB
Countdown
Bearing and
distance up to the
man-overboard
position
Man-
overboard
position
To Next Page
Loading...
Need help?
General
