JRC JR-8600 - Creating Routes

4-25
4.5.2 Creating routes
 To create a route, determine a route number and sequentially select the waypoints, which are
turn points.
 The same waypoint cannot be selected continuously.
 Up to 100 routes can be created.
 Up to 512 waypoints can be set per route.
 Either a TCS route or a normal route can be selected.
Procedure
1.
  
A route list is displayed.
2. Tap a number to be registered.
3. Tap .
4. Tap .
When a waypoint input screen is displayed, tap 001.
Item Description
ROUTE
A
RRIVAL CIRCLE Creates a normal route.
WHEEL-OVER LINE(WOL) Creates a TCS route.
COMMENT Enter a comment.
Number of the
displayed waypoint
Route number currently
being created