JRC JR-8600 User Manual

4-53
(7) Setting the EARLY COURSE CHANGE alert
a) Tap .
(8) Setting the END OF TRACK alert
a) Tap .
(9) Setting the ARRIVED AT WOL alert
a) Tap .
(10) Setting the ACTUAL COURSE CHANGE alert
a) Tap .
Item Description
SET Sets alert notification to ON/OFF.
THRESHOLD: The alert is issued when the time to reach the Wheel Over Point is
less than the threshold value.
OFF: Sets the alert to OFF.
THRESHOLD Set a threshold value of EARLY COURSE CHANGE.
A value from 3 minutes to 6 minutes can be set.
This item is not displa
y
ed when SET is OFF.
SOUND Sets the buzzer sound upon the issuance of an alert to ON/OFF.
ON: When an alert is issued, the alert is notified with a buzzer sound.
OFF: Even if an alert is issued, a buzzer sound is not emitted.
Item Description
SET Sets alert notification to ON/OFF.
THRESHOLD: The alert is issued when the time to reach the final waypoint is less
than the threshold value.
OFF: Sets the alert to OFF.
THRESHOLD Set a threshold value of END OF TRACK.
A value from 3 minutes to 6 minutes can be set.
This item is not displa
y
ed when SET is OFF.
SOUND Sets the buzzer sound upon the issuance of an alert to ON/OFF.
ON: When an alert is issued, the alert is notified with a buzzer sound.
OFF: Even if an alert is issued, a buzzer sound is not emitted.
Item Description
SET Sets alert notification to ON/OFF.
ON: Notifies the alert.
OFF: Sets the alert to OFF.
SOUND Sets the buzzer sound upon the issuance of an alert to ON/OFF.
ON: When an alert is issued, the alert is notified with a buzzer sound.
OFF: Even if an alert is issued, a buzzer sound is not emitted.
Item Description
SET Sets alert notification to ON/OFF.
ON: Notifies the alert.
OFF: Sets the alert to OFF.
SOUND Sets the buzzer sound upon the issuance of an alert to ON/OFF.
ON: When an alert is issued, the alert is notified with a buzzer sound.
OFF: Even if an alert is issued, a buzzer sound is not emitted.

JRC JR-8600 Specifications

General

Brand	JRC
Model	JR-8600
Category	GPS
Language	English