5 Instrument Description
24 IMAGO F3000 / 10.01
5.1.2 Keypad for numerical and text entry
Function
This can be used to enter large or small letters, or numbers, or both, depend-
ing on which dialog the instrument is in at the moment.
5.1.3 Freely assignable function keys
As standard, the instrument is delivered with the function keys assigned as
shown in the following table.
Standard
assignment
The key assignments can be altered within the setup program.
v Chapter 7.7.2 “Function keys”
Key Function Explanation
Quick Start the program that was used before is
started immediately
Previous
program segment
go back one segment during automatic
operation
Next
program segment
go forwards one segment during
automatic operation
Pause the program sequence is paused
during automatic operation
Change process step a different process step can be select-
ed during the current process step
Manual operation only accessible from the basic status:
v Chapter 6.5 “Manual operation”
Program1 starts program No.1 from the program
list
Program2 starts program No.2 from the program
list
Program3 starts program No.3 from the program
list
To Next Page
Loading...
Need help?
General
