6 Operation
54 IMAGO F3000 / 10.01
6.14.6 Retrofitting a P&P memory
If no P&P memory has been inserted previously, then it must first be recog-
nized by the instrument.
h Insert the P&P memory (available as an accessory)
A gray diskette symbol should appear in the screen at bottom right
h Ackowledge with
h Confirm the security query with
as well.
6.14.7 Making a backup copy
v Chapter 6.14.1 “Write data to P&P memory”
6.14.8 Commissioning a new instrument
This involves copying all the data from a write-protected P&P memory to a
new instrument.
v Chapter 6.14.4 “Copying programs”
6.14.9 P&P memory, programming by OEM
v Chapter 6.14.1 “Write data to P&P memory”
6.14.10 Loading data for a write-protected P&P memory on site
h Insert the P&P memory
The symbol for a write-protected P&P memory appears
h Confirm with
To Next Page
Loading...
Need help?
General
