7 Setup Program
88 IMAGO F3000 / 10.01
7.7.12 Production data
Production data, if activated are queried and displayed on the instrument ev-
ery time the program starts (configuration: “Entry type”).
During the queries, texts or numbers can (“optional”) or must (“obligatory”) be
entered.
Texts can be entered for 8 displays/queries, each 16 characters long (e.g. op-
erator No. or batch No.).
These data can be read out for recording and visualization.
7.8 Setup data info
This is used for the documentation of various items of information that appear
in the print-out of the setup data.
To Next Page
Loading...
