IMAGO F3000 / 10.01 29
6 Operation
Program
segments
During the program entry, the user can add in the following setpoints for the
program segments, as defined by the system manufacturer:
- chamber temperature, chamber humidity, core temperature
- delta-cooking, F-value, C-value, intensity of smoke generation,
additional values 1 and 2
- Segment running time
The additional values 1 and 2 can be used for special functions that have been
assigned to the system.
Programs
Are executable programs that can be linked to one another and designated by
a program name or icon.
6.2.2 Program entry
This description assumes that the system manufacturer has already defined
the process steps. Process steps can be defined or altered in the instrument
or within the setup program.
Select program
location
h Press the
key
h Use the arrow keys to select a vacant program location
h Confirm it with
Scrolling pages
If a page has been programmed with 5 segments, then the double-arrow keys
or can be used to scroll through the pages.
H
Programs can not only be put together on the instrument, but also
very comfortably by using the PC.
The software to do this is available as an accessory, called
Program editor IMAGO F3000.
To Next Page
Loading...
Need help?
General
