IMAGO F3000 / 10.01 69
7 Setup Program
Decimal places
One, two or three decimal places can be defined for the entry and display of
the setpoints.
Factory setting: no decimal places
Factory
setting
Basic status
All the setpoints that are active in the basic status are defined here.
Factory
setting
The factory setting for all setpoints in the basic status is 0.
These settings are contained in process step 99.
Setpoints Setpoints in process steps
Chamber
Humidity
Core
Delta T
F-value
C-value
Smoke intensity
Add.1
Add.2
0 — 200
0 — 100
0 — 200
0 — 100
0 — 999
0 — 999
0 — 100
0 — 999
0 — 999
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Setpoint 5
0 — 999
0 — 999
0 — 999
0 — 999
0 — 999
To Next Page
Loading...
Need help?
General
